How to clean the powder coating system powder hopper and spray guns
time2023/03/11
- After a long time working,there will be much powder stock in the gun,hopper wall,injector or powder hose. Do you kown how to clean them? Then read this article please.
powder hopper | |
|
1
|
Remove fluidizing AIR LINE |
|
2
|
Remove injector |
|
3
|
take our suction pipe |
|
4
|
wipe the electric line , AIR HOSE .and powder hose cleanly with cloth |
|
5
|
wipe the suction pipe clean |
6 | empty the remaining powder from hopper |
7 | clean the hopper s inner wall ,especially the bottom part , with vacuum cleaner |
8 | wipe the hoppers inner surface with clean cloth |
9 | replace the hopper to the original position |
|
manual powder coating gun
|
|
|
1
|
Remove the powder hose from gun |
|
2
|
remove nozzle from GUN and clean it |
|
3
|
Clean the gun s powder outlet with AIR along the direction of its flow |
|
4
|
clean the gun s body with AIR |
5 | Assemble it |
|
spray nozzles
|
|
|
1
|
clean the outer surface of nozzle with compressed air (Do not use thinner or other liquid for cleaning) |
|
2
|
Clean the nozzle s inside with compressed air after removing it . The powder accumulated in the GUN must be removed |
|
3
|
check if the nozzle is worn down |
|
4
|
Check if the compressed air s oil and moisture are completely removed |
|
powder injector
|
|
|
1
|
Disconnecting powder hose |
|
2
|
Remove sleeve holder |
|
3
|
Clean sleeve and inside of injector body |